Pripojeni VPN pro Windows 8/en: Porovnání verzí

You can find all the basic, necessary steps, which must be done before you can connect to UP VPN network, at page with '''[[Přístup k počítačové síti|all the basic information regarding UP network.]]''' Please, continue only after finishing all the steps, or you will be unable to connect to the VPN properly. So, how to we set up the VPN?

=== Step 1 ===

Right-click the wireless connection button and choose  ''Network and sharing center''. When a new window opens up choose option '''Set up a new connection or network'''.

=== Step 2 ===

''Set up connection or network'' tab opens up. Choose '''Connect to a workplace''' option.''

=== Step 3 ===

Choose '''Use my Internet connection (VPN)''' in the next window.

=== Step 4 ===

Fill in the IP address '''158.194.254.9''' into the box ''Internet address''.  

 

You can create any '''Destination name''' you want, however, we recommend using ''UPOL'' or ''UPOL VPN'', because this way you can identify UP VPN network easily.

 

Now, enable the option '''Do not connect now (...)''' as we have to finish setting up network specifications. Click on the button ''Next''.

=== Step 5 ===

It is quite important to make some changes in the settings of the VPN network. First, go to ''Control panel'' , then click on ''Network and Internet'', where you should find '''Network Connections'''. You will find your newly created UP VPN network there. Right-click the VPN network and choose ''Properties''.

=== Step 6 ===

Check the IP address '''158.194.254.9''' in the ''General'' tab. Then move on to the ''Security'' tab.  Now, set up ''Data encryption'', choose '''Require encryption''' option. Next, choose  '''Allow these protocols''' and enable protocol ''MS-CHAP v2'' in the ''Authentication''  option. Then move on to the ''Networking'' tab.

=== Step 7 ===

Choose '''Protocol IP version 4 (TCP/IPv4)''' in the ''Networking'' tab. Then click on '''Properities'''.

=== Step 8 ===

You should choose the option ''Obtain IP address from DHCP server automatically'' and then '''Use the following DNS server addresses'''. Now, write IP address '''158.194.80.254''' to the ''Preferred DNS server'' line, and '''158.194.80.253''' to the ''Alternative DNS server''. After accepting the setting by pressing the '''OK''' button, we've set up everything we need to use the VPN network.

=== Step 9 ===

Check whether ''Use default gateway on remote network'' is checked or not.

=== Step 10 ===

Now we've set up everything we need to use the VPN network. You can connect to the VPN network quite easily. Click on the ''wireless connection'' button, choose the UP VPN network and click the ''Connect'' button.

=== Step 11 ===

Once the login window comes up, fill in the login details - your '''[[Portál UP|Portal ID]]'' - and your password set up in Portal. Then click ''Connect'' and you're connected.

When you are done with all the work necessary, you can click ''Disconnect'' in the main bar.